Knowledgebase
Bullet Seating Plugs
Posted by on 13 August 2015 03:37 PM

The bullet seating plug that comes with the die set is as close to generic as we can make it. If you find that the bullet seating plug deforms the nose of the bullet, or will not seat it to the proper depth, we can make a custom bullet seating plug to fit your bullet. For this we would need a sample bullet and payment of $8.00 + $6.00 shipping & handling. 

Please note, for a custom bullet seating plug for the 50 BMG, cost is $30.00 + $6.00 shipping & handling.

Many times, you can make this fix yourself through the use of a drill press. Secure the seating plug under a 3/32" bit and drill further into it. The distance should never be increased more than 1/4". If this does not solve the issue, we recommend sending it to us. 

Our address is:

Lee Precision, Inc.
4275 Highway "U" 
Hartford, WI 53027