Knowledgebase
Custom Bullet Seating Plug
Posted by on 06 April 2012 11:20 AM

The Bullet Seater plug that comes with the die set is as close to generic as we can make it. If you find that the bullet seater plug deforms the nose of the bullet you are trying to seat, we can make a custom bullet seater plug to fit your bullet. For this we would need a sample bullet, payment of $8 plus shipping. Current lead time is 4 to 6 weeks.

Many times, you can fix this yourself through the use of a drill press. Secure the seater plug under a 3/32" bit and drill further into it. The distance should never be increased by more than 1/4". If this does not solve the issue, we recommend sending it to us.

A custom bullet seating plug can be ordered online.

Send the sample bullet to our address:

Lee Precision, Inc.
4275 Highway "U"
Hartford, WI 53027