Sorry - either this article does not exist or you haven't been given permission to view it.
RSS Feed

For the 45 ACP, there is no impact on the load data with using a small primer vs. a large one. It is safe to use the data published for large primers for use with small primers.
The whisper thin material that forms a hinge on the Auto Index Clamp is there for ease of assembly at the factory. After installed on the press, it has no effect on the indexing of the press, whether the hinge is intact or not.
Customers have been having difficulty with casting size, after preparing their mold contrary to what Lee recommends. Some customers are applying excessive amounts of Frankford Arsenal Drop Out Mold Release to their bullet molds cavities, causing a bu...
The undersized flash hole should be enlarged with one of the commercial flash hole uniformers. Or use a 1/16 (1.6mm) drill. Uniform flash holes are helpful to uniform ignition.
When you are done loading you should remove the hopper from the Load All II so that you can thoroughly clean all the powder residue from the hopper and red slide bar. It is not recommended that any type of powder be stored in the hopper. Unused powde...
If you find that your cases are being scratched and scored, you are able to correct it. Take your die apart and clean it with any available solvent, we use Hoppe's #9. Looking inside the die, you might be able to find the source of scoring. Take s...
Our decapper clamp has a 1/8" NTP pipe tap.
Most popular articles 
Newest articles