RSS Feed
Knowledgebase : Product Support > Reloading Kits
     

Single station presses will load nearly any cartridge. Cartridges are loaded in a batch process, which for example, 20 cases are deprimed and sized then the die changed to seat bullets in the 20 prepared cases. This die changing process is sped up by...
We offer a 50 BMG Press Kit [http://leeprecision.com/50-bmg-kit.html] with everything you need to get started, or you may purchase the below items individually. Recommended items for starting to load the 50 BMG 1. Press - LEE Classic Cast Press p/...
The Lee Value Turret Press kit includes the very popular four hole turret press [http://leeprecision.com/4-hole-turret-press-with-auto-index.html] along with the basic items you need to get started loading for rifle or pistol. Only the dies for the c...
The bullet sizing die kit includes the sizing die, Bullet Punch, case, and Liquid Alox Bullet lubricant. If you intend to size pulled .50 BMG bullets, you need to do the following. Remove the .50 BMG shell holder from the top of the ram. Install t...
The Anniversary kit and Breech Lock Challenger Kit will work for both rifle and pistol cartridges. What differentiates these kits is the way you prime. The Anniversary kit is for those who prefer to prime on the press (typically customers reloadin...
Breech Lock Bushings and Lock Ring Eliminator WILL NOT WORK in the RCBS Rock Chucker Press.
For more than 50 years,more shooters have chosen the famous Lee Loader for their firstĀ reloading tool than any other tool. They realize it is all they need good accurate ammunition. The Lee Loader held a world record listed in the Guinness Book of W...
This kit and a set of Lee dies [http://leeprecision.com/Reloading-Dies/] is everything you need to begin handgun reloading. The Classic Turret Press is fast and convenient when loading handgun cartridges, with rates in excess of 250 rounds per hour...
Unfortunately not. Due to declining sales for this great tool, we have no plans to expand the current line of Classic Lee Loaders. Unfortunately we do not provide custom services for this tool for the same reason.
The correct way to use the Lock Ring Eliminators and Breech Lock Bushings is as follows: The half moon cut out on the Lock Ring Eliminator/Breech Lock Bushing is meant as a stopping point to adjust your die in the Bushing, especially to release the ...
The Target Model Reloader, Lee Loader and the Auto Prime with threaded shell holders were made by Lee Custom Engineering. For the whole story, read Richard Lee's article in Handloaders Digest, 17 th. ed. Lee Custom Engineering has been out of bus...
All of our presses [http://leeprecision.com/reloading-presses/], and just about all of our die sets [http://leeprecision.com/reloading-dies/], use 7/8"-14 threads, which is industry standard. The only exception will be some large rifle calibers use...