RSS Feed
Knowledgebase : Product Support > Reloading Stand & Bench Plate
The original Rock-Chucker, if mounted properly, will fit on the Reloading Stand/Bench Plate system, however you will need to mount the press on a hardwood block cut to the proper size. See the attached PDFs for a fit guide and block template. When mo...
Assembly Instructions: http://www.leeprecision.com/cgi-data/instruct/90688.pdf [1] Video Instructions: http://www.youtube.com/watch?v=qDJe6X9xios [2] Tools Needed for Assembly: #2 Phillips Screw Driver, 7/16" Wrench, 3/8" Wrench Links...
The Steel Base Blocks are designed to fit all metallic Lee presses. We have a template on our website to facilitate mounting the Load-All to the Lee Reloading Stand or Bench Plate, however you will need to mount the press to 3/4" plywood or a hardwoo...