RSS Feed
Knowledgebase : Product Support > Shell Holders
The old #18 shell holders for the 43 Mauser were found to be too thin and were causing the shell holder rim to break off during the reloading process. We have since modified the #18 shell holder for the 43 Mauser. While we only modified the shell hol...
480 Ruger Hornady brass takes a #16 shell holder 480 Ruger Remington Peters brass takes a #5 shell holder. Our 480 Ruger die set ships with the #5 shell holder.
Our #12 Shell Holder (90529 $3.98) is a little tight but you can modify it to fit the 6.5x54 Mannlicher using a hand grinder.
The Auto Prime with threaded shell holders was made by Lee Custom Engineering. For the whole story, read Richard Lee's article in Handloaders Digest, 17 th. ed. Lee Custom Engineering has been out of business since 1988, and Lee Precision does not ma...
The Lee Hand Priming Tools (New Auto Prime, Ergo Prime and Auto Bench Prime) use unique Shell Holders made specifically for it. The numbers correspond with those on the Universal Shell holders, made for use in single stage presses. However, they diff...
_NOTE_: where two numbers are marked, the first number is the better choice HOLDER PISTOL HOLDER PISTOL HOLDER PISTOL 1 22 REM. JET 1 38 COLT N.P. 11 44 S ">15 25 ACP 19 ...
_NOTE_: where two numbers are marked, the first number is the better choice HOLDER PISTOL HOLDER PISTOL HOLDER PISTOL 1 22 REM. JET 1 38 COLT N.P. 11 44 S ">15 25 ACP 19 ...
a HOLDER RIFLE HOLDER RIFLE HOLDER RIFLE 4 [HTTP://WWW.LEEPRECISION.COM/SHELL-HOLDER-4.HTML] 17 REM. 10 [HTTP://WWW.LEEPRECISION.COM/SHELL-HOLDER-10.HTML] 6.5 JAP 2 [HTTP://WWW.LEEPRECISION.COM/SHELL-HOLDER-2.HTML] 7.7 JAP. ...
HOLDER RIFLE HOLDER RIFLE HOLDER RIFLE 4 [HTTP://LEEPRECISION.COM/R4-SHELL-HOLDER.HTML] 17 REM. 5 [HTTP://LEEPRECISION.COM/R5-SHELL-HOLDER.HTML] 6.5 REM. MAGNUM 6 [HTTP://LEEPRECISION.COM/R6-SHELL-HOLDER.HTML] 32/20 (32 W.C.F.) ...
The Auto Prime with threaded shell holders were made by Lee Custom Engineering. For the whole story, read Richard Lee's article in Handloaders Digest, 17 th. ed. Lee Custom Engineering has been out of business since 1988, and Lee Precision does not ...
If you have a tight or undersized Shell Holder, you have two options. If you have a small hand grinder, you can try and modify the Shell Holder to fit, removing any interference. Or you can return the Shell Holder to us with a sample case and we c...
For unlisted shell holders, please provide us the rim diameter, case diameter above the rim, and the thickness of the rim. We can then determine if we have anything that will fit your particular cartridge.