<![CDATA[Lee Precision, Inc.]]> <![CDATA[Custom Work Suspended]]> Due to unprecedented order volume, we have suspended all custom work until we are able to meet the required volume of our standard products. At present, it appears to be late summer of 2013. We will post on our homepage when this service resumes.

]]> <![CDATA[ Custom Bullet Seating Plug ]]> The Bullet Seater plug that comes with the die set is as close to generic as we can make it. If you find that the bullet seater plug deforms the nose of the bullet you are trying to seat, we can make a custom bullet seater plug to fit your bullet. For this we would need a sample bullet, payment of $8 plus shipping. Current lead time is 4 to 6 weeks.

Many times, you can fix this yourself through the use of a drill press. Secure the seater plug under a 3/32" bit and drill further into it. The distance should never be increased by more than 1/4". If this does not solve the issue, we recommend sending it to us.

A custom bullet seating plug can be ordered online.

Send the sample bullet to our address:

Lee Precision, Inc.
4275 Highway "U"
Hartford, WI 53027

]]> <![CDATA[32 ACP Undersized Sizing Die]]> Standard sizing dies are .329 inch. Undersized sizing dies are available for the 32 ACP, they are .326 inch and cost $27.98 + $5.81 shipping and handling (US domestic first class mail). 

Order directly from the factory: (262) 673-3075

]]> <![CDATA[Custom oversized expander]]> Most expanders are designed to .001 to .002" smaller than the bullet. For example the 577/450 Martini Henry dies ship with a .468 expander for a .470 bullet. 

We can make a custom over sized expander if you send in a sample bullet. Cost is $30.00 + shipping.

]]> <![CDATA[Lee Loader Custom Work ]]>