Knowledgebase
Lee Value Turret Press Kit (90928)
Posted by on 24 June 2015 11:30 AM

The Lee Value Turret Press kit includes the very popular four hole turret press along with the basic items you need to get started loading for rifle or pistol. Only the dies for the caliber you wish to load are needed as an extra item. While Lee dies are not required for use in the Value Turret Press kit, it is highly recommended because all Lee dies (except RGB) include the shell holder which is necessary for the press to use the dies. Lee dies also include the patented Powder Through Expander die which allows you to flare and charge the case mouth at the same time. Also included is load data and the appropriate powder dipper for many of the loads listed in the data.
There are additional items available to speed up the reloading process on this press, however they are not necessary to begin reloading.


If loading for a rifle cartridge, we highly recommend the purchase of the proper case length gauge so that you may properly and safely trim your cases. Additionally, you will need to purchase a powder funnel and the Lee Powder Measure kit. These inexpensive items are necessary to adequately charge the larger capacities of rifle cases. The measure that comes with the kit is designed for handgun charging. 

This press is ideal for handgun loading and with experienced hands, you can load over 250 rounds per hour. For those who wish to use the press as a single station press, the auto index feature can be disabled in seconds and then re-enabled in the same amount of time.

The fourth hole was added to accommodate the use of the Lee Factory Crimp die which is an optional die, but comes with our 4- Die Deluxe Pistol Die set.

You can see the press kit at http://leeprecision.com/value-4-hole-turret-press-kit.html