Knowledgebase
How to use the Breech Lock Bushings & Lock Ring Eliminators
Posted by Laine @ Lee Precision on 19 January 2017 10:23 AM

The correct way to use the Lock Ring Eliminators and Breech Lock Bushings is as follows:
The half moon cut out on the Lock Ring Eliminator/Breech Lock Bushing is meant as a stopping point to adjust your die in the Bushing, especially to release the Lock Ring when you need to turn the die in and out of the Bushing. To lock the Bushing, you need to depress the Pin and spin the Bushing clockwise to lock and engage it into place.
There are times when the Bushing will be a tight fit when the half moon cut out is aligned with the Lock Pin.


If you feel your Lock Ring Eliminator or Breech Lock Bushing is machined incorrectly, please return it to us and we will take a look at it. If it is machined incorrectly, we will replace it for you at no charge at that time.

Video on how to install a Breech Lock Bushing:

https://www.youtube.com/watch?v=0NdKj7kAins

Video on how to remove a Breech Lock Bushing:

https://www.youtube.com/watch?v=d1FS7Qwt-Zk

Video on how to install the Lock Ring Eliminator:

https://www.youtube.com/watch?v=zUpDuFrIR5g